AC DRIVES LASER - X
 

INTRODUCTION
 

AC Drives LASER - X variable frequency AC motor controller, is a micro-controller based IGBT module, with Pulse Width Modulation 

( P.W.M.) and is designed to work in harsh environment conditions. The drive has an acceleration, deceleration, forward, reverse and voltage boost facility, with built in protection for under/over voltage and over temperature.  

The Laser X is highly useful for general purpose and stand - alone applications and, has many practical features to minimize plant down time. Motors do not get degraded when using the Laser X. It has a 4 programmable Voltage / Hz pattern and has a LCD display for current status and fault message. Over current protection is through a Hall sensor. It also accepts a 0-10V or 4-20 mA reference input and has facility for remote operation.

AC Laser Drive - X
 

FEATURES
  • Pulse width modulation.
  • Micro-controller base.
  • Four programmable voltage / Hz pattern.
  • IGBT Module incorporated.
  • Auto-fault reset and restart.
  • Liquid crystal Display ( LCD ) for current status and fault message of drive.
  • Over current protection through Hall sensor.
  • Remote operation.
  • Accepts 0-10 V or 4-20 mA reference input.
  • Acceleration, deceleration and voltage Boost facility.
  • Forward / Reverse facility.
  • Under voltage over-voltage and over temperature protection.
  • Power on Run inhibit.
 

TECHNICAL SPECIFICATIONS
Input Voltage Single phase / 3-phase ±10%.
Input Frequency 50/60 Hz.
Output Voltage 0-Input voltage.
Output Frequency 1-50 / 60 / 100, 120Hz selectable.
Cooling Natural condition.
Ambient 0-45°C.
Output waveform Asynchronous sinusoidal P.W.M.